Diseqc Switch
DiSEqC not working to connect two Satellite LNBs to one receiver?
I am trying to connect to two LNBs from two separate satellites to Technomate 3000 receiver using a DiSEqC, but I keep receiving no signal at all.
I have tried changing the switch 3 times, so I am convinced now that it’s a settings a problem. I changed the settings in the receiver menu to show different LNBs with different DiSEqC, but nothing is working. tried the 1.2 and 2.0, but same results
Any advise would be much appreciated. Thanks
DiSEqC is a series of standards that can be
- a protocol that allows more than one signal on a single cable
- a simple switching signal..
it is not a machine or switch in itself.
so which Combiner or switch are you using (that conforms and is encoding using DiSEqC protocol) to connect the two LNB’s at the top end ?
and is it the right type of DiSEqC standard/protocol for your purpose.
Assuming that the Technomate 3000 is in DiSEqC mode, and you are selecting the 1/2/3/4/…8th antenna encoded on the cable… logically, it must be the top end not encoding them on the cable.
http://www.diseqc.org/ – origin of the standard
http://www.eutelsat.com/satellites/4_5_5.htm
http://en.wikipedia.org/wiki/DiSEqC – Wikipedia
(includes compatability chart between standards)
|
|
LAVA DiSEqC Swtich 2*1 $1.69 DiSEqC 2×1 switch for FTA receiver. Connect 2 LNBs to one FTA receiver. 900-2400MHz… |
|
|
Dual DSS Circular LNB Satellite LNBF Compatible W/ DISH NETWORK, DIRECTV, Bell $7.50 Dual DSS LNB for dish network, directv, bell express vu DSS Dual Output Circular LNBF used for DirecTV DSS (legacy) satellite reception in North America. Compatible with all DBS satellite receivers. FEATURES: * Dual Output LNBF |
|
|
DiSEqC Satellite Switch 4×1 2.0 FTA Receiver Dish LNB $1.94 We will send from California. It is Switch 4X1 DiSEqC Satellite Dish FTA Receiver LNB LNBF and one of the best quality on the markt. Description: The WS International WS4120-NE is the newest addition to the WS International line of multi switches and DiSEqC switches The all new WS4120-NE allows the user to connect up to 4 satellite sources (LNBF) and combine the signal into a single coaxial cab… |
|
|
Digiwave DGS – 41D – 4×1 Diseqc Switch – Full Case – Heavy Duty – Chieta $3.99 The DIGIWAVE DiSEqC switch will enable the user to select one LNB signal between 4 different LNBs of any type. The 4 input ports marked LNB1, LNB2, LNB3 or LNB4 are connected to the 4 LNBs, which may be on 4 different dishes, and the output marked RECEIVER OUT is connected to the receiver. Features 4×1 Diseqc Switch DiSEqC 2.0 support bi-directional DiSEqC full control functions Allow remote uni… |